Relieving the Pressure from a Stuck Garage Door Spring

garage door spring repair Yorktown

For many homeowners, getting their garage door stuck can be a frustrating situation. Whether the door suddenly won’t move up or down, or gets stuck halfway, figuring out what’s wrong and making repairs isn’t always easy. One common culprit is a problem with the garage door springs. In this post, we’ll discuss what to do if you find one of your springs is stuck under tension.

garage door spring repair Yorktown

What are Garage Door Springs?

Garage doors are generally balanced by either a single torsion spring mounted above the door, or by extension springs along each side. The springs help reduce the physical effort required to open and close the heavy door. They work by winding and unwinding metal coils to either pull the door up or push it down using a system of pulleys and cables.

When to Check for a Stuck Spring

If your garage door suddenly becomes very difficult to open or close, or starts moving up or down unevenly, the first things to inspect are the springs. Look for signs they may be broken, slipping off the pulleys, or failing to wind or unwind properly. Another indication is hearing a loud popping or groaning noise coming from the spring mechanism when operating the door.

Testing for Tension

To check if a spring is stuck under pressure, try gently sliding a wooden dowel or piece of PVC pipe into the coils from the side. Garage Door Spring Repair in Yorktown can also inspect and test for tension if needed. If you meet strong resistance and can’t easily slide the rod in and out, the spring likely has significant tension built up. Never put any part of your body near an untested spring – the force can cause serious injury.

Safely Releasing the Pressure

Once you’ve confirmed a spring is stuck, the next step is releasing the tension in a controlled manner to avoid potential hazards. Here are the basic steps:

  1. Acquire necessary tools and safety equipment. This includes heavy-duty gloves, safety goggles, a board to brace against the springs, and tools to disassemble connections if needed.
  2. Identify spring winding cones or pulleys. On a torsion spring, these are at each end. For extension springs, locate the attachment points on the header bracket.
  3. Place a sturdy board across the bottom coil of the spring to distribute force. This acts as a backstop if it suddenly releases.
  4. With gloves on, gradually insert a rod into one end of the spring and slowly twist it in the opposite winding direction. Go slowly to ease pressure in small increments.
  5. Have an assistant stand by the board braced against the spring in case it releases abruptly. Continue unwinding until all tension is fully relieved.
  6. Double check the spring is fully unwound before proceeding with repairs. Leave safety equipment in place until you’re sure all stored energy is dissipated.

Replacing a Broken or Stuck Spring

If a spring breaks or cannot be safely unwound, replacement will be necessary. This is recommended leaving to a qualified professional like a garage door technician. Spring removal and installation requires special tools and expertise to manage the heavy weight and tension safely. Improper handling can cause serious harm. Reputable companies like ‘Garage Door Spring Repair in Yorktown’ have the training and experience to swap springs efficiently without putting homeowners at risk.

Taking safety precautions when working with garage door springs can help avoid potential injuries. Knowing how to carefully relieve pressure from a stuck spring is an important first step if repairs are needed. With the right tools and technique, the task can be completed without incident. But professional assistance is always recommended if you’re unsure of the proper procedures. Your safety should be the top priority.

Back To Top